Universal 90 Degree Under Dash Power Brake Pedal with Booster Master Cylinder Kit

  

This is a new style brake pedal assembly with 7 Single Diaphragm Brake Booster and Bail Top Master Cylinder. This pedal assembly mounts up on your firewall and the pedal arm hangs down into the car. But the best part is, it mounts the booster and master cylinder 90 degrees to the side so they don't stick out into the engine compartment. A lot of custom builds have no space left in the engine compartment, so a booster sticking out is not an option.

But if you've got space under the dash, then this is the perfect fix! Also a great alternative to the under floor kits that mess up your floor board and can get in the way of exhaust and transmission/motor mounts. This kit includes a brand new 7 single diaphragm brake booster with new master cylinder. The booster mounts with a 4-bolt pattern. The 4 bolts are in a perfect square and are 3 3/8 apart (center to center).

The master cylinder is an equal reservoir setup. The master cylinder is the bail top style, and features a 1" bore and the ports measure 9/16" and 1/2. This master cylinder will work with any drum/drum, disc/drum, or disc/disc setup.

The pedal includes a weld on tab with a threaded hole for the brake pad. Once you have the pedal arm where you want it, weld on the tab for the brake pad. Quality laser cut pedal assembly.

The 90 degree under dash pedal provides a secure way to mount a power booster, or a manual brake master cylinder and has pre-drilled holes for a manual master cylinder on the firewall if you decide later to go manual. This unit will fit a wide range of early Chevy, Ford, Dodge cars and trucks. We include the pedal mounting pad and a standard push pedal with this unit. Weld on the tab for the brake pad.

Includes 7" Single Brake Booster & 1" Bore Master Cylinder. 9/16"-18 & 1/2"-20 ports on the master cylinder. Ports on Both Side so you can plumb left or right side. PRAUD (DBP-002) + 7 Single w/ 3511 (#32).